Print

Fretting Tools (Base)

Fretting Tools (Base)

In this category you will find the basic tools for fretting work.
More of them in the other tool categories.


Display per page
Sort by
1 - 30 of 34 results
Product no.: 04040051

Fret wire replacement with the Chip Stopper Set, 0.3mm + 0,5mm. For guitar, bass, also mandolin and ukulele etc.

1x 0,3mm + 1x 0,5mm

13.50 *
Delivery weight: 0.05 kg

In stock

Product no.: 19200020

Precision straight edge for checking the fret board evenness.
E-Guitar - Acoustic Guitar - Classical Guitar

MADE IN GERMANY

45.00 *
Delivery weight: 0.48 kg

In stock

Product no.: 19200054

Precision straight edge for checking and adjusting the fingerboard Flatness (relief) on basses with many scale lengths (30/32/33/34/35/36").
Basses with baritone, short, medium, long and extra length scale can be edited with this straight edge.

MADE IN GERMANY

65.00 *
Delivery weight: 0.79 kg

In stock

Product no.: 19170090

Fret setting tool for partial knocking down of high spots on fret boards or attach loose fret ends - without having to remove the strings.
A very useful tool for quick repairs or for pressing down when gluing.

18.50 *
Delivery weight: 0.1 kg

In stock

Product no.: 04050012

Custom-made Fret Cutter to cut as flush as possible close to the edge of the fingerboard to safe filing time.
With a long edge life, even with extra hard fret wire.

  • Also suitable for stainless steel fret wire
  • Total length: 200mm
49.50 *
Delivery weight: 0.35 kg

Not in stock
This product is currently not in stock - please ask for delivery time.

Product no.: 04020001

Very handy fret hammer with two different hammering surfaces
Threated heads for easy replacement

34.50 *
Delivery weight: 0.3 kg

In stock

Product no.: 19200019

Fret Rocker: 6-sided straight edge for checking unevenness in fret heights before and after levelling.

  • This miniature precision ruler is made of 2mm thick stainless steel
  • precision ground on all edges.
  • Antiglare sufrace
  • Size app.: 100x55mm
  • Edge length app.: 12 / 20 / 30 / 50 / 70 / 95mm

Made in GERMANY

22.50 *
Delivery weight: 0.078 kg

In stock

Product no.: 20020002

Neck support made from hardwood with protective felt. Use e.g. while fretwork.
Material: hardwood
Dimensions: approx.25cm x 7.0cm x 3cm

16.50 *
Delivery weight: 0.25 kg

In stock

Product no.: 04050004

Use this special tool to file accurately and fast the 35° angle to newly installed fret wire ends. 

27.80 *
Delivery weight: 0.51 kg

In stock

Product no.: 04040001

This is the professional fret file for smooth and fine (#300) recrowning.
So it files jumbo fret wire on one edge, medium on the other.
Cutting length: 100mm
Total length: 200mm

79.00 *
Delivery weight: 0.12 kg

Not in stock
This product is currently not in stock - please ask for delivery time.

Product no.: 19100002
  • Precision feeler gauge with 20 sheets of 0.05 to 1.00 mm.
  • Ideal tool to measure the width of the fret slots
  • Nickel plated bracket with locking screw
  • Blade length 100 mm.
8.50 *
Delivery weight: 0.09 kg

In stock

Product no.: 19200018

Pocket size ruler to measure out string action and setup standards
Etched version for professional use
Scale with 1 / 4mm  gradation ranging from 0.25 to 3.5
0-20mm ruler on both sides
0-75mm ruler
Back: Conversion table millimeters to inches with fractions
Material: stainless steel, 0.3mm
Size: app. 90 x 50mm

17.90 *
Delivery weight: 0.065 kg

Still in stock

Product no.: 04030004

Small dressing file, extra fine, 75x25mm with ergonomic hardwood handStück
Intended for spot leveling or short sections where you file more than you want with a longer file.

  • Size (L x W x H): 75 x 25 x 55mm
24.50 *
Delivery weight: 0.35 kg

In stock

Product no.: 04040006

Fingerboard protector to cover the area next to the fret. Effectively protects for minor repair work on a fret.

Protector type: universal

  • Slot: 3.0 x 70mm
2.95 *
Delivery weight: 0.05 kg

In stock

Product no.: 19200061

Pocket size ruler to measure out string action and setup standards - Imperial Inch Version

Etched version for professional use

The string height markings are at increments of .010" to 0.140“

17.90 *
Delivery weight: 0.065 kg

In stock

Product no.: 04040005

Fret-end (dressing)  file with polished edges (180mm)
Ideal for chamfering the fret end angles
 

11.80 *
Delivery weight: 0.05 kg

Not in stock
This product is currently not in stock - please ask for delivery time.

Product no.: 04040004

Fret-end file
Cut on narrow sides until the edge
Use it after the three corner file to cut the burr to the fret board
One side flat, the oposite rounded

  • Cross section: 3 x 1,6mm
  • Total length: 155mm
11.80 *
Delivery weight: 0.05 kg

Not in stock
This product is currently not in stock - please ask for delivery time.

Product no.: 04050007

For cutting out the fret feet (tang) at fret ends (e.g. binding on fingerboard)
Robust all-steel design with resharpenable and replaceable tool

129.00 *
Delivery weight: 0.4 kg

In stock

Product no.: 19200010
1x fingerboard gauge 7,25" to 12"1x fingerboard gauge 14" bis 20"Stainless steel 0,5mm;incl. fret slot depth lines for checking slot cuts
22.50 *
Delivery weight: 0.065 kg

In stock

Product no.: 04050006

Very robust Fret Bender in the 3-roller principle for individual bending and adjustment of fret wire to the required fingerboard radius.

  • Also suitable for stainless steel
  • For fret wire from 1,5x0,6mm to 4,3x2,5mm
125.00 *
Delivery weight: 1.4 kg

In stock

Product no.: 04040019

Two Stücks of fret board guards
The narrow one fits between higher notes on the board

5.60 *
Delivery weight: 0.05 kg

In stock

Product no.: 04040002

This is the professional coarse (#150)fret file for recrowning as a first step when much material has to be removed in fast strokes.
Use the fine diamond fret file 04040001 as next step to remove possible file marks.
The file has two different radius on the edges.
Cutting length: 100mm
Total length: 200mm

79.00 *
Delivery weight: 0.12 kg

Not in stock
This product is currently not in stock - please ask for delivery time.

Product no.: 04040020

Set of six fret board guards for almost every fret wire
Improved version with practical possibility of fixing by a rubber band!

16.50 *
Delivery weight: 0.05 kg

In stock

Product no.: 04040007

Spring loaded holder for sanding belts - the ideal helper for sanding on single fret crowns

  • Sanding belt: 324 x 6,35mm
9.90 *
Delivery weight: 0.24 kg

In stock

Product no.: 04030008

Precisely flat file block for leveling frets. Has hard wood handle which has a flat top.
Can be used with fine grit sand paper for additional honing after filing - a good time saver before recrowning.
Fast material removal and  smooth file cut - low cutting force due to it's propper weight.
Professional Quality.

35.00 *
Delivery weight: 1.2 kg

In stock

Product no.: 19200044

Understring Radius Gauge Set to check and adjust the fretboard radius (Guitar)

  • 9 Stücks: 7.25-9.5-10-12-14-15-16-17-20 inch
34.80 *
Delivery weight: 0.05 kg

In stock

Product no.: 19200045

Understring Radius Gauge Set to check and adjust the fretboard radius (Bass)

  • 9 Stücks: 7.25-9.5-10-12-14-15-16-17-20 inch
39.50 *
Delivery weight: 0.05 kg

Still in stock

Product no.: 04050002

Use this special tool to file accurately and fast the 35° angle to newly installed fret wire ends. 

37.50 *
Delivery weight: 0.8 kg

In stock

Product no.: 04030001

Custom made for leveling frets. Very even and straight file block, smooth cross cut on both sides. Size app: 200x40x8mm
Cut is more coarse than 04030006.

27.80 *
Delivery weight: 0.35 kg

In stock

Product no.: 04030002

Fret leveling file, extra fine, 150x25mm with ergonomic hardwood handStück
Intended for dressing and leveling frets and also fret ends. Works quickly without chatter.

  • Size (L x W x H): 150 x 25 x 55mm
  • Cut: single cut
28.50 *
Delivery weight: 0.35 kg

In stock

*
Price incl. VAT (taxfree: outsite EU or EU-VAT-No.) / plus delivery
 
1 - 30 of 34 results