Narrow Fretwire

Fretwire for Mandolin, Banjo, Ukelele Vintage Instruments, Dulcimers

Crown width from 1,5 - <2mm

Medium Fretwire

Fretwire for Classic Guitars, Steelstring Accoustics and Electric Guitars

Crown width from 2 - < 2,5mm

Wide Fretwire

Fretwire for Steelstring Accoustics and Electric Guitars, Bass

Crown width > 2,5mm

Fret wire rolls

Fretwire Pieces

Cut to size fret wire sets

Fret wire sets pre-cut to a certain size

Fretwire Materials

German Silver 12% / 18%
Stainless Steel
Special Brass
Bell Bronce
Anallergic Alloy

Zero Frets

In this category you will find fret wire that is used as a zero fret.

The height of the zero fret should be approx. 0.3mm higher than the height of the fret wire used. So if 1.0mm crown height was used, a 1.3mm high fret wire can be used with it.
Unfortunately, there are hardly any higher fret wires specifically designed for this purpose. These here are higher, but unfortunately have no barbs at the tang, but if you glue them in,they work fine.
The offset has no significant influence on the intonation.