Diamond-coated fret file with curved file head for MEDIUM fret wire (app. 2 to app. 2,5 mm).

The file is designed so that both filing surfaces have the same hollow radius - but one with a coarse (#150) and one with a fine (#300) diamond grit.

As both grits are available directly on one tool, a simple flip is all that is needed to switch between roughing (=coarse) and fine work.

Filing completely without chatter marks for less reworking up to a high gloss. After sanding with P320 and P600, 000 and 0000 steel wool produces a high gloss.

Rounded corners, even for very flat frets.

The wider file head allows safe working close to the guitar top without the handle resting on it or causing scratches.

The slightly convex head shape enables targeted work on straight and curved fretboards and reduces fatigue through a more natural hand movement.

The rubberized, non-slip handle allows the file to be guided with precision and control.

The file head can also be held directly with the fist for filing for even more control.

• File radius: medium fret wire
• File surface coarse: #150
• File surface fine: #300
• File head: 25mm, arched
• File surface: app. 105mm
• Total length 210mm

Please note: every diamond coating is subject to wear depending on use.

Use the coarse grit for preparatory work (80-90%) and do the final finishing work with the fine file side.

Strong heat from filing or hard materials such as stainless steel will wear away the industrial diamonds and reduce the service life considerably in some cases.

No warranty when used with stainless steel!