1-Step Peghole TCT Drill Bit - 6,3 / 8,6mm
Custom sized counterbore drill bit to produce quickly and accurately peg holes in one step.
Such holes support tuners much better and so they last longer.
Fits metric 6mm posts and 8,9mm bushings
Pre-drill with center point and protruding cutting edges
Counter drill with two spurs
Cutting edges TC tipped – very high service life

• Fits metric 6mm posts and 8,9mm bushings
• Total length: 60mm
• Shank (C):
• Drill size (A): 6,3mm / 20mm (B)
• Drill size (E): 8,6mm

Professional quality!

1-Step Peghole TCT Drill Bit - 7 / 8,6mm
Custom sized counterbore drill bit to produce quickly and accurately peg holes in one step.
Such holes support tuners much better and so they last longer.
Fits US 6,3mm posts and 8,9mm bushings
Pre-drill with center point and protruding cutting edges
Counter drill with two spurs
Cutting edges TC tipped – very high service life

• Fits metric 6,3mm inch-size posts and 8,9mm bushings
• Total length: 60mm
• Shank (C): 8mm
• Drill size (A): 7,0mm / 20mm (B)
• Drill size (E): 8,6mm

Professional quality!

1-Step Peghole TCT Drill Bit - 7,8 / 10mm
Custom sized counterbore drill bit to produce quickly and accurately peg holes in one step.
Such holes support tuners much better and so they last longer.
Pre-drill with center point and protruding cutting edges
Counter drill with two spurs
Cutting edges TC tipped – very high service life

• Works for e.g. Grover, Schaller and Gotoh sealed tuners that require 10mm (13/32") pegholes, 7,8mm threaded hex peghead bushings
• Total length: 60mm
• Shank (C):
• Drill size (A): 7,8mm / 20mm (B)
• Drill size (E): 10mm

Professional quality!

High quality Forstner drill bit for hard and soft wood.
Cuts precise holes for tuners (e.g. bassguitar)
For best result use drill press and low speed
Can be resharpened

• Diameter (A): 12mm
• Schaft: 10mm
• Length: 125mm
• Cutting Head Length: 7mm

Made in EU

High quality Forstner drill bit for hard and soft wood.
Cuts precise holes for tuners (e.g. bassguitar)
For best result use drill press and low speed
Can be resharpened

• Diameter (A): 5/8" (15,87mm)
• Schaft: 10mm
• Length: 125mm
• Cutting Head Length: 8mm

Made in EU

High quality Forstner drill bit for hard and soft wood.
Cuts precise holes for tuners (e.g. bassguitar)
For best result use drill press and low speed
Can be resharpened

• Diameter (A): 18,5mm
• Schaft: 10mm
• Length: 125mm
• Cutting Head Length: 9mm

Made in EU

Special hollow drill to drill out (extract) broken screws.

To remove a broken tremolo screw, for example, drill a 6mm hole in a piece of wood about 10mm thick and fasten it with screw clamps so that the steel remnant of the screw fits inside the drill. To protect the lacquer, you can also tape it off beforehand.

Using a slow-speed drill, drill down around the defective screw and work the screw free.

The hole is closed with a 6mm wooden dowel that fits the wood and a new one is drilled for the new screw.

• Outside diameter: 6mm
• Inner diameter: 4mm
• Length: 60mm