Seymour Duncan SH1  Model '59  Humbucker original P.A.F. reproduction

• warm tone with great sustain
• single conductor cable
• string spacing: 1.925 " / 48.9 mm

Made in USA

Seymour Duncan SH1  Model '59 Humbucker original P.A.F. reproduction

• warm tone with great sustain
• single conductor cable
• string spacing: 1.925 " / 48.9 mm

Made in USA

The Vintage Blues kit consists of two matched SH-1 '59 pickups for the neck and bridge position. It is based on the vintage P.A.F. Humbuckers of the late '50s and is ideal for blues, jazz and classic rock.

• Calibrated set of two SH-1 Humbuckers
• Based on Vintage P.A.F. Humbuckers of the late 50s
• Perfect for Blues, Jazz and Classic Rock
• 2 conductor cable
• Black

Made in USA

The Distortion Mayhem kit consists of a pair of extra strong SH-6 Duncan Distortion humbuckers for the neck and bridge position. It is an aggressive set for the high-gain range and is designed for the toughest punk, metal and hardcore.

• Ceramic magnets
• Two SH-6 Duncan Distortion Humbucker for neck and bridge position
• Aggressive, modern set
• Designed for punk, metal and hardcore
• 4-wire, shielded cable

Made in USA

Humbucker with moderate output developed in collaboration with Slash consistent response, warmth and balance

• AlNiCo II magnets
• avaiable for neck and bridge position
• DC resistance neck: 7,92 kOhm, bridge: 8,53 kOhm
• Resonant peak neck: 6,40 kHz , bridge: 6,00 kHz
• 2conductor vintage-wire

Made in USA

The world's most popular humbucker. Provides slammin' output while retaining singing highs, aggressive harmonics, and just the right blend of sustain and distortion. Goes from sweet warm tones to raw rock 'n' roll. Compared to the SH-14 Custom 5, the JB has a stronger treble detail. Some players use it with 250K pots to smooth out the highs.
Recommended for bridge position. Often a JB is paired with a neck pickup like the SH-2n Jazz (Seymour's favorite) for versatility or a SH-1 '59 for P.A.F. tones.

• riginally a Custom Shop pickup for George Lynch
• The same open sound character as a SH-1 '59 Model, but the SH-12 "roars" rather than that "screams"
• Sounds very fat and punchy
• Alnico V magnet
• Only available for bridge position
• DC Resistance: 10.0 ohms
• Resonant Frequency: 7.0 kHz
• For systems with more than 50 mm between the E and e string
• 4-wire, shielded cable

Made in USA

Humbucker with moderate output developed in collaboration with Slash

• consistent response, warmth and balance
• AlNiCo II magnets
• neck and bridge position
• DC resistance neck: 7,92 kOhm, bridge: 8,53 kOhm
• Resonant peak neck: 6,40 kHz , bridge: 6,00 kHz
• 2conductor vintage-wire

Made in USA

TB-4 Jeff Beck™

• bridge position
• 4-cond., zebra

Made in USA

"Patent Applied For" sound with considerably more meat and kick, with the perfect balance of power, sustain, and distortion. Distinctive high end and midrange. The ceramic magnet and custom coil design of the SH-5 is replaced by compressed dynamics, an enhanced harmonic structure, and a punchy bass. Perfect for down tuned guitars (dropped tunings) without the tendency to squishing. Ideal for classic rock, heavy rock, funk, punk, R & B, metal and drop-tunings.

• PAF with afterburner has a lot more meat and kick than the SH-1
• Very assertive
• Ceramic magnets and special coil design give it compressed dynamics, enhanced harmonic and powerful bass
• Perfect for dropped tunings without the tendency of squishing
• 4-wire shielded cable
• Best fits in the bridge position
• DC Resistance: 14.1 Kohm
• Resonant frequency: 6 kHz

Made in USA

The world's most popular humbucker. Provides slammin' output while retaining singing highs, aggressive harmonics, and just the right blend of sustain and distortion. Goes from sweet warm tones to raw rock 'n' roll. Compared to the SH-14 Custom 5, the JB has a stronger treble detail. Some players use it with 250K pots to smooth out the highs.
Recommended for bridge position. Often a JB is paired with a neck pickup like the SH-2n Jazz (Seymour's favorite) for versatility or a SH-1 '59 for P.A.F. tones.